保定市清苑区模板加工厂

护坡砖模具在生产的过程中，每隔一段时间,必须把模具全分解,然后进行全部物品清扫；在定期维护过程中,对模具外表面,拆、换零部件进行彻底的清扫清理；装模前要对模具的上下表面进行清擦,保证模具安装面和压机工作台面不受压伤及模具在生产中上下安装面的平行度；模具装好后,将模具各部分清擦干净,特别是导向机构,其型面清擦干净,以保证制件的质量。 During the process of production, the mold must be completely decomposed every time, and then all the articles are cleaned. In the regular maintenance process, the outer surface of the mold, the dismantling, and the parts are thoroughly cleaned and cleaned; before the mold is installed, the top and bottom surface of the mold must be cleaned to ensure the die installation surface and the press work table. Do not suffer from pressure injury and mold in the production of the upper and lower installation surface of the parallel degree; after the mold loading, the mold parts clean, especially the guiding mechanism, its surface clean clean, in order to ensure the quality of the parts.