联系我们
保定市清苑区模板加工厂
固话：13313028229
新闻动态
怎样才能使高铁遮板钢模具保持不变形
怎样才能使高铁遮板钢模具保持不变形，不发生化学反应？
How to keep the high iron shutter steel mould free from deformation and chemical reaction?
1. 生产出来的模具应该摆放整齐，堆积的高度不要为了省空间，堆积的太高，而发生变形现象
1. The moulds produced should be placed in order, and the stacking height should not be too high to save space, so as to cause deformation
2. 入库必须严格检查，把不合格的模具挑选出来，严禁把一些过质的塑料混合物带进模具库房以免发展化学反应，模具韧性发展变化，从而直接影响生产出来的围栏的规格。
2. The warehousing must be strictly checked to select the unqualified molds. It is strictly prohibited to bring some over quality plastic mixture into the mold warehouse to avoid the development of chemical reaction and the development and change of mold toughness, so as to directly affect the specifications of the fence produced.
3. 模具库房应尽量保持干燥，通风，保持住一个很好的模具库房，定期检查库房温度和打扫库房卫生
3. The mold warehouse should be dry and ventilated as much as possible, keep a good mold warehouse, regularly check the warehouse temperature and clean the warehouse sanitation
4. 模具库房温度要适宜最好在25度以下，以免发展化学反应而影响模具的正常使用。 在夏季模具库房一定要严格监控，发现有变色或者变形形象，马上隔离以免影响别的模具。
4. The temperature of the mold warehouse should be suitable to be below 25 degrees, so as not to affect the normal use of the mold due to the development of chemical reaction In summer, the mold warehouse must be strictly monitored. If there is discoloration or deformation image, it should be isolated immediately to avoid affecting other molds.
How to keep the high iron shutter steel mould free from deformation and chemical reaction?
1. 生产出来的模具应该摆放整齐，堆积的高度不要为了省空间，堆积的太高，而发生变形现象
1. The moulds produced should be placed in order, and the stacking height should not be too high to save space, so as to cause deformation
2. 入库必须严格检查，把不合格的模具挑选出来，严禁把一些过质的塑料混合物带进模具库房以免发展化学反应，模具韧性发展变化，从而直接影响生产出来的围栏的规格。
2. The warehousing must be strictly checked to select the unqualified molds. It is strictly prohibited to bring some over quality plastic mixture into the mold warehouse to avoid the development of chemical reaction and the development and change of mold toughness, so as to directly affect the specifications of the fence produced.
3. 模具库房应尽量保持干燥，通风，保持住一个很好的模具库房，定期检查库房温度和打扫库房卫生
3. The mold warehouse should be dry and ventilated as much as possible, keep a good mold warehouse, regularly check the warehouse temperature and clean the warehouse sanitation
4. 模具库房温度要适宜最好在25度以下，以免发展化学反应而影响模具的正常使用。 在夏季模具库房一定要严格监控，发现有变色或者变形形象，马上隔离以免影响别的模具。
4. The temperature of the mold warehouse should be suitable to be below 25 degrees, so as not to affect the normal use of the mold due to the development of chemical reaction In summer, the mold warehouse must be strictly monitored. If there is discoloration or deformation image, it should be isolated immediately to avoid affecting other molds.
