| 模具构成 |
| 添加时间：2019/5/13 16:00:54 浏览次数： |
| 模具除其本身外，还需要模座、模架、模芯导致制件顶出装置等，这些部件一般都制成通用型。 模具企业需要做大做精，要根据市场需求，及技术、资金、设备等条件，确定产品定位和市场定位，这些做法尤其值得小型模具企业学习和借鉴，集中力量逐步形成自己的技术优势和产品优势。所以，我国模具企业必须积极努力借鉴国外这些先进企业的经验，以便其未来更好的发展。 In addition to the die itself, it also needs the die base, die base, die core leading to parts ejection device, and so on. These parts are generally made into universal type. Die and mould enterprises need to be guandao.89ix.comhuanwanggui.89ix.compeidiangui.89ix.combigger and better. According to market demand, technology, capital, equipment and other conditions, product positioning and market positioning youle.89ix.comhuatiw.89ix.comzuhehuati.89ix.comshould be determined. These practices are especially worth learning and learning from small-scale die and mould enterprises, and concentrate on gradually forming their own technological and product advantages. Therefore, China's die and mould enterprises must actively learn from the experience of foreign advanced enterprises in order to better develop in the future. |
| 上一页 设计隔离墩钢模具前要明确制品的设计要求 |
| 下一页 根据浇注系统型制的不同可将塑料模具分为三类 |