| 随着模具标准件应用日益广泛,模具标准化、商品化、商品化程度的提高,对于钢产品质量、品种规格以及交货周期将提出更高的要求.将灌好的水泥的隔离墩模具放在振动台上震动,根据气候温度高低来决定水泥的凝固程度,一般为1-2天.进行拆模,最后将隔离墩模具上残留的水泥渣清理干净,并放在阴凉干燥的地方.对于我国模具行业来讲,创新技术是行业发展的必要环节,这是最主要的;现阶段,国内钢模具业供需不稳是相对比较大的问题,低端产品产能过剩,中高端产品数量少是急需改变的现状;建立自己的品牌,开拓更广阔的市场;研发更环保的绿色模具产品;随着标准的模具应用越来越广泛,模具标准化、商品化程度的提高有助于隔离墩钢模具的发展.
With the widely application of standard, the mold of standardization, commercialization, and commercialization for steel product quality, variety, specifications and delivery cycle will put forward higher request. Will fill good cement vibration isolation pier mold on vibration bench, depends on the climate temperature of cement solidification degree, the general is 1 to 2 days. To open mold, the final will be isolated pier mold, residual slag cement is clean and put in a cool, dry place. For China's mold industry, innovative technology is the necessary link of industry development, this is the main; At present, the supply and demand instability of domestic steel industry is relatively large, with the low end product capacity surplus and the low number of medium and high-end products as the current situation of urgent change. Build your own brand and open up a broader market; Research and development of greener mould products; As the standard mold application is more and more extensive, the improvement of mold standardization and commercialization will help the development of isolation pier steel mould.
我国隔离墩钢模具行业以每年巨大的进出口总额被誉为全球模具制造大国.我国模具进出口总额从数量上看处于增长趋势,随着我国经济继续增长.但实际上入口的模具主要以中低端产品为主,世界市场上的话语权并不大.这些问题制约着模具产业的可持续发展,我们的工厂得到了当地政府的支持模具行业.本厂坚持质量赢得市场的目标市场更大更强.在这几年模具的市场竞争很是激烈,必须要在竞争激烈的条件下,认真的面对每一件事情,才能在不断发展的过程中不断发展,模具厂家一定坚持精诚所至的态度,对待每一个客户,这样一来才能在最好的程度上促进中国模具产业的大发展.
Isolation pier steel mould industry in our country every year imports and exports has been hailed as a huge global mould manufacturing superpower. China's imports and exports increased look from the number in the mould trends, along with our country economy continue to grow. But the fact is the entrance to the mold mainly to mid-range products, power on the world market is not big. These problems restrict the sustainable development of mould industry, our factory has the backing of the local government mould industry. Our factory insist on quality to win market target market bigger and stronger. In the mould for several years, the market competition is very fierce, must be in the competitive conditions, serious face each thing, then they can develop in the process of continuous development, mold manufacturers must adhere to the attitude of faith, to treat every customer, so can to the best extent promote the great development of China mold and die industry. |