保定市清苑区模板加工厂

1. 生产出来的模具应该摆放整齐，堆积的高度不要为了省空间，堆积的太高，而发生变形现象 2. 入库必须严格检查，把不合格的模具挑选出来，严禁把一些过质的塑料混合物带进模具库房以免发展化学反应，模具韧性发展变化，从而直接影响生产出来的围栏的规格。 3. 模具库房应尽量保持干燥，通风，保持住一个很好的模具库房，定期检查库房温度和打扫库房卫生 。

1. mold produced should be neatly stacked, height not in order to save space, the accumulation is too high, the distortion phenomenon of 2. storage must be strictly checked, picked up the mold unqualified, prohibit the matter with some plastic mixture into the mold storehouse lest development of chemical reaction, the change and development of mold and toughness. Out of the fence directly affects the production specifications. 3. the mold warehouse should keep dry, ventilated, keep a good mold warehouse, check the temperature of the storeroom regularly and clean the sanitation of the warehouse.