| 护坡塑料模具预制流程 |
| 添加时间：2018/10/20 9:47:58 浏览次数： |
| 护坡塑料模具预制流程：在护坡塑料模具内模喷一层机油或脱模剂，然后注入混凝土，用振动平台上振捣成型，然后将模具放在平缓的地面让混凝土自然凝固，大约24小时左右即可脱模，然后继续生产，也就是一天一模，混凝土凝固好之后才好脱模，制作的护坡砖光滑度要高。 Slope protection plastic mold precasting process: in the slope protection plastic mold, spray a layer of oil or mold release agent, then infuse concrete, vibrate with vibrating platform, and then put the mold on the gentle ground to allow the concrete to solidify naturally, about 24 hours or so, it can be demolding, and then continue production, that is, one day, one mold, concrete. After the solidification is good, the mould can be released, and the smoothness of the slope protection bricks is high. 所有形状的护坡塑料模具使用方法都是一样的，成型时间也相同，用途都是护坡，只不过不同形状的护坡塑料模具用在不同的地方，比如公路、高速、高铁使用的是同一类的护坡塑料模具，常用的有空心六棱块模具、网格护坡模具等，河道、水库、大坝使用的是一类护坡塑料模具，常用的有实心六棱块模具、工字型护坡塑料模具、各种连锁块塑料模具。 All the plastic moulds for slope protection are used in the same way, the same forming time and the same purpose. However, different plastic moulds for slope protection are used in different places, such as highway, highway and high-speed railway, which are the same kind of plastic moulds for slope protection. Moulds and so on, the river, reservoir, dam uses is one kind of slope protection plastic mold, commonly used has the solid six ridges mold, the I-shaped slope protection plastic mold, each kind of chain block plastic mold. 护坡塑料模具的质量也分上中下等之分，上等护坡塑料模具使用pp工程聚丙烯新料注塑成型，模具颜色为纯白，模具质量好，一个模具可以使用200次以上，中下等质量的护坡塑料模具使用再生料加工成型，模具颜色发黄或发黑，这样的模具比较脆，容易变形或碎掉。 The quality of slope protection plastic mold can be divided into upper and lower grade. The top grade slope protection plastic mold is made of PP engineering polypropylene new material. The color of the mold is pure white and the quality of the mold is good. A mold can be used more than 200 times. The middle and lower quality slope protection plastic mold is made of recycled materials. The color of the mold is yellowing or blackening. Such mold is crisp, easy to deform or shatter. |
| 上一页 检查井模具生产要点 |
| 下一页 高速铁路公路水泥预制件模具 |